Engine Break-In

MIAMI · SMART ENGINE LAPPING SYSTEM

Professional oil bath break-in for .21 nitro engines.

A proper break-in gives your engine more power, a stable tune and a longer life. We do it in a controlled oil bath, so you skip the parking lot and save the fuel.

$80 per engine · full Mode 1 + Mode 2 program · numbered certificate

Book your break-in →

REDS .21 nitro engine with tuned pipe

INSIDE OUR SHOP

The full program. Mode 1 + Mode 2.

The SMART Engine Lapping System has two break-in modes, and the manufacturer recommends running Mode 1 followed by Mode 2 for the best results. Most engine prep services run only one, because the full program ties up the machine for most of a day. We run both, every time. That is the level we race at.

MODE 1

750 minutes · 5 cycles × 150 min

12.5 hours submerged in heated oil, engine held at 90 °C, controlled RPM, with a fan cool-down between every cycle.

MODE 2

Starts automatically

In continuous mode the machine goes straight into the second program as soon as Mode 1 finishes, with its own cycles and RPM profile to finish the fit.

12.5 h+

Mode 1 alone, before Mode 2

5 × 150

Cycles × minutes, continuous mode

90 °C

Engine temp target (194 °F)

60 °C

Heated oil bath (140 °F)

200 RPM

Steady lapping speed, pinch monitored

SMART Engine Lapping System oil bath break-in machine at Team Tradardi
The SMART Engine Lapping System, oil bath module.
Nitro engine mounted in the heated oil bath tank
Engine mounted and submerged in the heated oil tank.
Touch panel showing temperatures, RPM, cycles and run time
Every parameter monitored live: temperatures, RPM, pinch, cycle and remaining time.
Close-up of the oil bath break-in tank
No fuel burned, no lean runs, no hot spots.

WHY OIL BATH BREAK-IN

Done right, every time.

Controlled

Exact temperature and RPM at every stage.

Safe

No fuel burned, no risk of running lean.

Certified

Photo record on arrival and a numbered certificate on return.

HOW IT WORKS

Four simple steps.

01

Buy the service ($80). Your checkout address is where we ship the engine back.

02

Fill out the Break-In Request with your engine's brand, model and serial number.

03

Ship us your engine with your order number inside the box. We photograph it on arrival.

04

We run the full program and ship it back sealed, with your numbered Break-In Certificate.

We break in .21 engines from O.S., REDS, ONG and most other brands. Buying a new engine from us? Ask us to break it in before it ships. Service subject to our Break-In Service Terms.

AFTER YOUR BREAK-IN

Your first six tanks.

Tank 1

Use break-in fuel or add a little castor oil. Let the engine idle and heat cycle while you fine tune the idle.

Tanks 2 to 4

Drive on the track, rich on top. Lean the high speed needle a little each tank, staying rich.

Tanks 5 and 6

Get close to your race tune, keeping the high speed needle slightly rich.

Tip: After every tank, let the engine cool with the piston at bottom dead center. Your engine keeps improving over the first gallon of fuel.

Ready to race?

$80 per engine. Send it in and get it back track-ready, certified.

Book your engine break-in →